bet体育足球

Pulp and textile sludge Engineering

Key words: pulp, textile sludge Engineering
Case overview: 1. Material name: pulp and textile sludge 2. Treatment capacity: 13-15t / h 3. Initial moisture: 75% 4. Final moisture: 50%. 5. Drying temperature: 140 ℃. 6. Outlet temperature: 70-85 ℃. 7. Heat source: 0.4-0.5mpa. The steam model is kjg-250, with heat transfer area of 250m2. The three sets can meet the production requirements
Online consultation
Case details Photo Gallery

1. Material name: pulp, textile sludge

2. Treatment capacity: 13-15t / h

3. Initial moisture: 75%

4. Final moisture: 50%

5. Drying temperature: 140 ℃

Outlet temperature: 85 ~ 6 ℃

7. Heat source: 0.4 ~ 0.5MPa steam

Select model as KJG-250    Heat transfer area 250m two   Three sets can meet the production requirements

Related articles
Related cases
  •  Pulp and textile sludge Engineering
    Pulp and textile sludge Engineering
  •  Special production line for waste water dryer
    Special production line for waste water dryer
  •  Fly ash three cylinder rotary dryer project
    Fly ash three cylinder rotary dryer project
  •  Paddle dryer for electroplating sludge
    Paddle dryer for electroplating sludge
  •  Production line of iron oxide yellow, iron oxide black and other pigments
    Production line of iron oxide yellow, iron oxide black and other pigments
  •  Drying engineering of feed grade calcium hydrogen phosphate
    Drying engineering of feed grade calcium hydrogen phosphate
  •  Fiber mixture vacuum paddle dryer
    Fiber mixture vacuum paddle dryer
  •  Oil field sludge dryer
    Oil field sludge dryer
Top