bet体育足球

Hello, welcome to the official website of Changzhou Yixin drying equipment Co., Ltd!
Mobile website

Service hotline:
thirteen billion seven hundred and seventy-five million twenty-seven thousand eight hundred and eighteen
Add wechat consultation
Current location: home page > Engineering cases
Engineering cases
Engineering cases
Engineering cases
  •  Pulp and textile sludge Engineering

    Description: initial heat transfer temperature: 150 ~ 150 ℃, final moisture content: 2.5 MPa, 3.5% moisture content, 3.5% moisture content, 3.5% moisture content, 2.5% moisture content, 3.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture content, 2.5% moisture, 2

    Detailed introduction
  •  Iron ore three cylinder rotary kiln project

    Brief description: the drying system of the iron ore three cylinder rotary kiln of Changzhou Yixin drying equipment Co., Ltd. heats the materials to 100-300 degrees in advance and then enters the rotary kiln for roasting and reduction process. This process uses the waste heat energy of the rotary kiln, which not only improves the output of the rotary kiln, but also saves about 30% of the coal-fired.

    Detailed introduction
  •  Special production line for waste water dryer

    Brief introduction: Changzhou Yixin drying company specializes in customized industrial waste water dryer and waste liquid dryer special production line, according to different actual characteristics of different waste water and waste liquid dedicated dryer equipment, to meet your needs! With the sustained and rapid development of China's economy, the continuous increase of urban process and industrialization process, environmental pollution is increasingly serious, and the state attaches more and more importance to environmental protection. Over the years, I

    Detailed introduction
  •  Fly ash three cylinder rotary dryer project

    Brief introduction: 1. The working principle of fly ash three cylinder rotary dryer is applicable to the drying of industrial dust and waste residue such as fly ash, phosphogypsum and titanium gypsum. Its working principle is as follows: powdery or granular fly ash is transported to the feeder by belt feeder, and then the fly ash is transported to the drying drum by the feeder, and the plate reader for uniform distribution of fly ash in the drying drum turns over Dynamic, evenly dispersed with hot air fully

    Detailed introduction
  •  Complete drying equipment for biochemical sludge and physicochemical sludge

    Brief introduction: biochemical sludge and physicochemical sludge are filtered by plate and frame filter press and then dried in special paddle sludge dryer. Only a small amount of gas is needed to take away the moisture during the drying process, which greatly reduces the loss of heat carried away by the gas and improves the heat utilization rate. The whole drying process is carried out in a closed state, and the organic volatile gas and odor gas are in the sealed atmosphere Send to tail gas treatment unit to avoid environmental pollution

    Detailed introduction
  •  Paddle dryer for electroplating sludge

    Brief introduction: electroplating sludge mainly comes from solid waste produced by various electroplating waste liquid and electrolyzer solution in industrial electroplating plant after liquid-phase chemical treatment. According to its state characteristics, the hollow paddle dryer developed by our company can effectively and quickly meet its drying requirements. The paddle dryer is also suitable for the drying of domestic sludge, printing and dyeing sludge, papermaking sludge, thermoelectric sludge and chemical sludge

    Detailed introduction
  •  Vacuum hollow blade series

    Brief introduction: Vacuum hollow paddle dryer belongs to low temperature drying equipment, specially designed for drying temperature sensitive materials. Applicable materials: fish meal, bean dregs and other food industries.

    Detailed introduction
  •  Special dryer for bean dregs

    Brief description: soybean dregs are a kind of material with high oil content and combined water. The moisture content is not easy to be treated. According to this physical property, our company has developed a special drying equipment for soybean dregs, which can control the moisture content below 12% at a time. Using our company's "bean dregs special dryer", in the whole drying process can make full use of heat, so that the bean dregs are heated evenly, the color of the dried bean dregs is good, the loss of nutrients is less, and the energy consumption is low

    Detailed introduction
  •  Production line of iron oxide yellow, iron oxide black and other pigments

    Brief description: the production line (selection of primary hollow blade dryer + secondary disc continuous dryer) is a successful case of our company's combination of disc dryer and hollow blade dryer. In the actual production process, it has incomparable technical advantages compared with other drying equipment. It can dry materials with moisture content of 55% below 140 ℃ to less than 0.5%, so as to ensure the quality of materials.

    Detailed introduction
  •  Drying engineering of feed grade calcium hydrogen phosphate

    Brief introduction: the characteristic of pulse air dryer is that the diameter of air drying tube decreases and expands alternately. In order to strengthen the drying process, the pulse air drying tube can give full play to the high heat and mass transfer in the accelerating section. When the acceleration movement ends, the drying diameter suddenly expands, and the particles enter the drying tube with large diameter by inertia

    Detailed introduction
  •  Molybdenum powder engineering

    Brief introduction: 1. Equipment Overview: 1. The machine is composed of container, spiral mixing blade and transmission parts; the spiral blade is generally made of double or three layers, the outer spiral collects materials from both sides to the center, and the inner spiral material is transported from the center to both sides to form convective mixing. 2、 Features: 1. Large loading coefficient and small equipment area; 2. Easy cleaning when mixing viscous or cohesive materials. Three

    Detailed introduction
  •  Penicillin residue Engineering

    Brief description: working principle: the wet material is continuously added to the first drying plate on the upper part of the dryer by the feeder, and the rake arm with rake blade makes rotary motion to make the rake blade continuously turn over the material. The material flows through the surface of the drying pan along the exponential helix, and the material on the small drying plate is transferred to the outer edge, and falls to the outer edge of the large drying plate below

    Detailed introduction
previous page    one    two    ... four    next page   
A total of 44 records, page 1 / 4

Top